Water softener 30LPM
Water softener 30LPM
A WaterMark approved water softener to reduce scaling and spotting in your home or building. Insist on a certified system.
This system eliminates water hardness, safeguarding your pipes and appliances from scale buildup. The SOL30-E1 uses automatic, time-based regeneration, backwashing at pre-set intervals, providing hassle-free operation. While the SOL-E3 volumetric regeneration backwashes only when necessary, saving water and salt. Check here.
Hard water is water that contains dissolved minerals such as limestone, iron, sulphur, magnesium and calcium. If these minerals are not removed from your water, they will cause scaling, eventually blocking plumbing and shortening the life of appliances - particularly hot water units, dishwashers, washing machines, etc.
Say ‘no’ to scale in your facility.
Minerals found in hard water build up in appliances such as hot water systems and dishwashers reducing their service life and making them less efficient. Soft water saves you money by replacing them less often and saves the environment by cutting waste.
Features
Features
Valve: Automatic E1-matic
Flow Rate: 30 Lpm
Capacity: 12,000 litres
Connection: 1" Male BSPT, _" Drain
Min/Max Pressure: 138 - 862 kPa*
Operating Temperature: 5 - 40C (41 - 104F)
Power Supply: 230V AC / 50 Hz
Replacement Media Kits: RMK-SOL60
Accessories: WTV5090 - Micro switch for automation of external equipment.
WTV5000 - Bypass assembly for testing, and maintenance.
PTE30 - Hardness test kit.
WTV5050 - Blending valve for partial hardness removal
SS5000 - SoftenerSafe Media, 5 litres
Note: Capacities are based on a hardness of 100ppm. The flow rate while the filter backwashes, needs to be equal to the stated service flow to maintain proper backwash functionality, which is critical for optimum performance of filtration systems.
Chlorine (free Chlorine) tolerance is 0.5ppm - high chlorine levels permanently damage the softening resin & is not covered under warranty. If chlorine exceeds this limit, we recommend a carbon pre-filter such as the WH2 or CFS Series. Please refer to Puretec for a specific recommendation. In any case, a carbon pre-filter is recommended to protect against chlorine spikes & prolong the resin life.
Specifications
Specifications
•Commercial water softner
•Reduces calcium & minerals from hard water
•29,000L capacity, 60 LPM
Share
